JD-700 dispenser is epoxy, adhesive material such as controlling the amount of ejection and the ejection state of that Controller. (The minimum time can be set from 0.005 seconds)
JD-700 dispenser is epoxy, adhesive material such as controlling the amount of ejection and the ejection state of that Controller. (The minimum time can be set from 0.005 seconds)
- JD-700 is that control quantity and status of adhesives.
- Control air pressure in detail
- Fluid drip prevention vacuum mechanism comes as standard
- Easy to handle by LCD Panel
- Have Digital systems for control
- Easy to set up with automation
- Applying materials are low and high velocity
- Easy to control quantity of adhesive because of setting time (Start at least 0.005 sec)
- This dispensing system has storage device that is help to easy work
GENERAL SPECIFICATION
| ITEM | DESCRIPTION |
|---|---|
| Power | AC220V±10% 50/60Hz |
| Power consumption | 1.5A(MAX) |
| Control Method | Electric pneumatic control circuit |
| Tange of air pressure | 0.05~0.7MPa (0.2~7.0kg f/㎠) |
| Supplying air pressure | 0.8MPa이상 |
| Range of Shot Time | 0.005~99.999sec |
| Dispensing Mode | Time/Steady |
| Vacum Function | Basic |
| Input & Output signal | *Inuput: NO CONTACT OR CONTACT POINTS, USB COM. *OUTPUT: CONTACT POINTS |
| OPERATING CAPACITY | 600 cycle/min |
| TEMPERATURE | +5℃~+40℃ |
| EXTERNAL SIZE | (W)218×(D)161×(H)82 |
| WEIGHT | 3.3kg below |
