JECO Split Type UV curing machine for coating purpose can be directly installed on the other equipment (system equipment) by separating the lamp module and power supply, which is applicable to the coating process and UV coating, etc.
JECO Split Type UV curing machine for coating purpose can be directly installed on the other equipment (system equipment) by separating the lamp module and power supply, which is applicable to the coating process and UV coating, etc.
With reference to the lamp module in applying this system that you have, you are required to consult with our technical department for its exterior size. Power supply is also at your option among electronic type or coil type, etc. UV lamp output can be adjusted by stages. Transformer is 3-step control, and the electronic type can be finely adjusted. In case of applying the size, either small or large type is applicable. It is easy to upgrade the system including applying the UV sensor system
- This curing machine is provided with a module consisting of power controller and lamp housing unit, which is applicable to UV coating line.
- The machine can be equipped with metal halide lamp or mercury lamp.
- Lamp output can be adjusted to Strong/Weak or Strong/Medium/Weak (3-steps).
- This machine enables to secure a sufficient irradiation through an illuminance suitable for the product characteristic and the speed of roller freely controlled.
- The machine’s lamp cooling is carried out in an air-cooling type – having a simple design structure and easy in maintenance.
- Lamp housing chamber should be designed not to allow exposure to light.
- It requires supply and exhaust duct system.
GENERAL SPECIFICATION
| ITEM | DESCRIPTION |
|---|---|
| SYSTEM DIMENSION | 770 mm (L) x 164 mm (W) x 243 mm (H) |
| LAMP HOUSING POWER CASE | 1700 mm (L) x 1030 mm (W) x 2100 mm (H) |
| CURING WIDTH | 600mm |
| INPUT VOLTAGE | 440V,380V, 220V 3P, 60 Hz |
| LAMP TYPE | HG , GA, METAL UV LAMP – 6EA |
| LAMP ARC LENGTH | 600mm |
| TOTAL CONSUMTION | 8 KW / LAMP |
| WAVELENGTH | 320 ~ 420 nm(Peak : 365nm) |
| IGNITION TIME | 3 MINUTE |
| REFLECTOR TYPE | COLD MIRROR |
| MAIN SWITCH (NFB) | MAIN POWER ON/OFF SWITCH |
| LAMP AMPERE METER | DISPLAY LAMP’S CURRENT |
| LAMP TIME CHECK METER | DISPLAY LAMP’S USED TIME |
| LAMP ALRAM | ALRAM LAMP CHANGE |
OPTION
| ITEM | DESCRIPTION |
|---|---|
| PLC & TOUCH SCREEN | OPTION |
| HOT MIRROR (152X152X2.2T) | OPTION |
