JHCI-302C produced as an ultra-low temperature UV curing machine is designed for UV curing in a low temperature in a variety of film, PC, and PET manufacturing process. Through the JECO’s own adsorption system (AIR SUCTION), JECO developed the temperature maintenance system that may keep ultra low temperature of 40 degree or less while maintain a high amount of light.
JHCI-302C produced as an ultra-low temperature UV curing machine is designed for UV curing in a low temperature in a variety of film, PC, and PET manufacturing process. Through the JECO’s own adsorption system (AIR SUCTION), JECO developed the temperature maintenance system that may keep ultra low temperature of 40 degree or less while maintain a high amount of light.
JECO Ion Blower upgraded the quality by solving the unbalance of temperature between the product inlet area and the product outlet area. In addition, with lamp height controller, cold mirror, IR filter, etc. equipped as basic specification, it minimized additional expense.
- UV curing machine for PET film and shin sheet.
- With an adsorption fan mounted on the lower area, it enables to cure the product without its blowing off.
- UV curing system used for curing the product sensitive to temperature.
- Teflon mesh belt instead of flat belt is used.
- Buzzer sounds when it reaches lamp replacement time.
- It enables UV curing for general electronic product as well as light product.
- Simple manipulation.
- Easy to replace conveyor belt.
- It provides an excellent maintenance because UV lamp can be easily replaced.
- Height of upper lamp house is freely and simply controlled owing to its handle attached.
- Height of upper lamp house can be adjusted with the lamp turned on.
- Lamp height indicator is mounted being easy to refer to the height of lamp.
- Maintains a low temperature for its high intensity of irradiation.
GENERAL SPECIFICATION
| ITEM | DESCRIPTION |
|---|---|
| SYSTEM DIMENSION | 1700 mm (L) x 780 mm (W) x 1900 mm (H) |
| SPEED CONTROL | MOTOR SPEED CONTROL |
| CURING WIDTH | 300mm |
| BELT SIZE | 330mm |
| INPUT VOLTAGE | ORDER MADE |
| LAMP TYPE | MERCURY OR METAL UV LAMP 3 KW – 2 EA |
| LAMP ARC LENGTH | 360 mm |
| TOTAL CONSUMTION | 3 KW / LAMP |
| WAVELENGTH | 320~ 420 nm |
| IGNITION TIME | 3 MINUTE |
| REFLECTOR | COLD MIRROR |
| MAIN SWITCH (NFB) | MAIN POWER ON/OFF SWITCH |
| LAMP AMPERE METER | DISPLAY LAMP’S CURRENT |
| LAMP TIME CHECK METER | DISPLAY LAMP’S USED TIME |
| START SWITCH | CURING START |
| COLOR | STANDARD (IVORY) OR CUSTOM COLOR |
OPTION
| ITEM | OPTION |
|---|---|
| HOT MIRROR (152X52X2.2T) | (OPTION) |
