LED Lamp Cure Machine
JHCI-1206TS (FILM/COATING)
JECO Film-type Curing System that is designed for its curing zone to be separately installed has been developed to enable a direct application to the other equipment (System Equipment), which is designed so that it can be used effectively in (in line) optical film, glass printing curing, and production of UV silk printed matters. With a shutter mounted on it, the system enables to provide protection after UV irradiation.
Feature– JECO UV film curing machine has a shutter inside applicable to a large size film line.
– The machine can be equipped with metal halide lamp or mercury lamp.
– The machine can be equipped with metal halide lamp or mercury lamp.
SPECIFICATIONGENERAL SPECIFICATION
| ITEM | DESCRIPTION | ||
| SYSTEM DIMENSION | 250(W) x 2000 (L) x 500 (H) | ||
| CURING WIDTH | 600~ 1600mm(80~120W) | ||
| INPUT VOLTAGE | 220V , 3P, 60 Hz 125A | ||
| LAMP TYPE | HG, GA, MTL UV LAMP 1~8EA | ||
| LAMP ARC LENGTH | 1700mm | ||
| TOTAL CONSUMTION | 20 KW / LAMP | ||
| WAVELENGTH | 200 ~ 420 nm(Peak : 365nm) | ||
| IGNITION TIME | 3 MINUTE | ||
| REFLECTOR TYPE | COLD MIRROR | ||
| HOT MIRROR (152X152X2.2T) | USE | ||
| MAIN SWITCH (NFB) | MAIN POWER ON/OFF SWITCH | ||
| LAMP AMPERE METER | DISPLAY LAMP’S CURRENT | ||
| LAMP TIME CHECK METER | DISPLAY LAMP’S USED TIME | ||
| LAMP ALRAM | ALRAM LAMP CHANGE | ||
| COLOR | STANDARD (IVORY) OR CUSTOM COLOR | ||
GENERAL SPECIFICATION
| ITEM | OPTION | ||
| PLC & TOUCH SCREEN | OPTION | ||
General DetailsJECO Film-type Curing System that is designed for its curing zone to be separately installed has been developed to enable a direct application to the other equipment (System Equipment), which is designed so that it can be used effectively in (in line) optical film, glass printing curing, and production of UV silk printed matters. With a shutter mounted on it, the system enables to provide protection after UV irradiation. Therefore, it leads to the manufacture of film product in a stable quality (ROLL TO ROLL SYSTEM). In addition, it enables a high-speed production and facilitates a proper product management through its maintenance of high quantity of light and low temperature. It is easy to change lamp causing time loss to be minimized in replacing the lamp. With reference to the lamp module in applying this system that you have, you are required to consult with our technical department for its exterior size. Power supply is also at your option among electronic type or coil type, etc. UV lamp output can be adjusted by stages. Transformer is 3-step control, and the electronic type can be finely adjusted.
In case of applying the size, either small or large type is applicable. It is easy to upgrade the system including applying the UV sensor system.
In case of applying the size, either small or large type is applicable. It is easy to upgrade the system including applying the UV sensor system.
Feature & Advantage– JECO UV film curing machine has a shutter inside applicable to a large size film line.
– The machine can be equipped with metal halide lamp or mercury lamp.
– Ballast is in an electronic type so that the output of lamp can be freely controlled.
– With its broad width of irradiation and homogeneity, it can be applied with optical film equipment.
– It is designed to minimize temperature damage applied to the product through cold mirror/hot mirror and exhaust air flow balance.
– Lamp unit is in a cassette type being easy to replace lamp.
– The machine can be equipped with metal halide lamp or mercury lamp.
– Ballast is in an electronic type so that the output of lamp can be freely controlled.
– With its broad width of irradiation and homogeneity, it can be applied with optical film equipment.
– It is designed to minimize temperature damage applied to the product through cold mirror/hot mirror and exhaust air flow balance.
– Lamp unit is in a cassette type being easy to replace lamp.
Detail
