JHCI-302C
JHCI-302C produced as an ultra-low temperature UV curing machine is designed for UV curing in a low temperature in a variety of film, PC, and PET manufacturing process. Through the JECO’s own adsorption system (AIR SUCTION), JECO developed the temperature maintenance system that may keep ultra low temperature of 40 degree or less while maintain a high amount of light.
JHCI-102C-UD
JHCI-102C-UD JECO UV curing machine is designed for each UV lamp to be mounted on upper and lower parts to enable to cure both sides in one equipment. Therefore, it can be effectively used for the production of a variety of electronic parts as well as PCB coating (Conformal Coating).
JHCI-152C
JHCI-152C
JHCI-151C
JHCI-151C
JHCI-501EB-12IN-SH
UV Tape Remover is JECO wafer-purpose semi-automatic UV curing machine that can cure 8~12 inches. It is designed in the scan irradiation method where the lamp moves with the product fixed, which enables homogenous irradiation of the product by minimizing the tolerance of illuminance (using a filter) based on a long experience and technical competence
JHCI-301ES-SH
JHCI-301ES-SH is the UV curing machine directly installed on the other equipment (system equipment) through dividing UV lamp module and power supply, which can be applied to unlimited applications such as wafer-purpose curing machine (equipment seating purpose), UV coding process and film curing line, modification of NIR dryer (when UV drying is required simultaneously), etc. With a shutter mounted, it enables protection after UV irradiation when needed only.
JHCI-301TB-8IN
UV Tape Remover is JECO wafer-purpose semi-automatic UV curing machine that can cure 8~12 inches. It is designed in the scan irradiation method where the lamp moves with the product fixed, which enables homogenous irradiation of the product by minimizing the tolerance of illuminance (using a filter) based on a long experience and technical competence. In addition, scan frequency can be pre-set, and therefore it is suitable for meeting the required amount of light depending on UV tapes that vary.
JHCI-1206TS
JECO Film-type Curing System that is designed for its curing zone to be separately installed has been developed to enable a direct application to the other equipment (System Equipment), which is designed so that it can be used effectively in (in line) optical film, glass printing curing, and production of UV silk printed matters. With a shutter mounted on it, the system enables to provide protection after UV irradiation.
JHCI-2003ES
JECO Film-type Curing System that is designed for its curing zone to be separately installed has been developed to enable a direct application to the other equipment (System Equipment), which is designed so that it can be used effectively in (in line) optical film, glass printing curing, and production of UV silk printed matters. With a shutter mounted on it, the system enables to provide protection after UV irradiation. Therefore, it leads to the manufacture of film product in a stable quality (ROLL TO ROLL SYSTEM).