Dispenser
SBD-A100
SBD-A100 dispenser is epoxy, adhesive material such as controlling the quantity of discharge and the discharge condition of Controller.
Feature– SBD-A100 is that control quantity and status of adhesives.
– Control air pressure in detail
– Fluid drip prevention vacuum mechanism comes as standard
– Have Digital systems for control
– Control air pressure in detail
– Fluid drip prevention vacuum mechanism comes as standard
– Have Digital systems for control
SPECIFICATION| ITEM | DESCRIPTION | ||
| Power | AC220V±10% 50/60Hz | ||
| POWER CONSUMPTION | 1.5A(MAX) | ||
| CONTROL METHOD | ELECTRIC PNEUMATIC CONTROL CIRCUIT | ||
| RANGE OF AIR PRESSURE | 0.05~0.7MPa (0.2~7.0kg f/㎠) | ||
| RECOMMANDED SUPPLYING AIR PRESSURE | OVER 0.7MPa (MAX:0.99Mpa) | ||
| RANGE OF SHOT TIME | 0.01~99.9sec | ||
| DISPENSING MODE | Time/Steady | ||
| VACUM FUNCTION | BASIC | ||
| INPUT & OUT PUT SIGNAL | *INPUT: NO CONTACT OR CONTACT POINTS *OUTPUT: CONTACT POINTS |
||
| OPERATING CAPACITY | 600 cycle/min | ||
| TEMPERATURE | +5℃~+40℃ | ||
| EXTERNAL SIZE | (W)160×(D)141×(H)62 | ||
| WEIGHT | 1.8kg below | ||
Feature & Advantage– SBD-A100 is that control quantity and status of adhesives.
– Control air pressure in detail
– Fluid drip prevention vacuum mechanism comes as standard
– Have Digital systems for control
– Easy to set up with automation
– Applying materials are low and high velocity
– Easy to control quantity of adhesive by setting time (Start at least 0.01 sec)
– SBD-A100 has storage device that is help to easy work
– Control air pressure in detail
– Fluid drip prevention vacuum mechanism comes as standard
– Have Digital systems for control
– Easy to set up with automation
– Applying materials are low and high velocity
– Easy to control quantity of adhesive by setting time (Start at least 0.01 sec)
– SBD-A100 has storage device that is help to easy work
Detail
