Dispenser
TAD-200S
TAD-200S type of Dispenser is a high-performance Micro-Processor with Precision Controller.
Feature– High quality with the functions ; minimal amount dispensing control, high-speed work, and automatic dispensing and automatic stop by the interval work.
– Vacuum control stops liquid from flowing after dispensing finishes.
– Vacuum control stops liquid from flowing after dispensing finishes.
SPECIFICATION| ITEM | DESCRIPTION | ||
| Control method | Electronic / Pneumatic system | ||
| Dispensing pressure | 0~10kg/㎠(S:Standard), 0~4kg/㎠(L:Option), 0~2kg/㎠(P:Option) | ||
| Time range | 0.01~99.99sec | ||
| Interval timer | 0.01~3.99sec | ||
| Vacuum pressure | 0~350mmHg | ||
| Out signal | *Open connector, DC24V
*200mmsec(Relay), 100mmsec(Relay) |
||
| Power source | AC220V 50/60Hz (AC110V 50/60Hz: Option) | ||
| Power consumption | 32W | ||
| External Dimension, Weight | 232(W)×186(D)×81(H)mm, 2.7kg | ||
Feature & Advantage– High quality with the functions ; minimal amount dispensing control, high-speed work, and automatic dispensing and automatic stop by the interval work.
– Vacuum control stops liquid from flowing after dispensing finishes.
– Varied output functions facilitate automation and interface.
– The digital timer displayed on LED in manual mode makes it easy to set time.
– Memory the values for dispensing until you set the values again.
– Vacuum control stops liquid from flowing after dispensing finishes.
– Varied output functions facilitate automation and interface.
– The digital timer displayed on LED in manual mode makes it easy to set time.
– Memory the values for dispensing until you set the values again.
Detail
